November 2008 - ipv6calc - lists.deepspace6.net

ipv6calcweb and -T
by Peter Bieringer 23 Nov '08

23 Nov '08

Hi, At 19.11.2008 23:32, JC Janos wrote: > make test > > ... > make[1]: Leaving directory `/usr/local/src/ipv6calc-0.72.0/ipv6logstats' > make[1]: Entering directory `/usr/local/src/ipv6calc-0.72.0/ipv6calcweb' > # Pseudo random selected > ./test_ipv6calcweb.sh 2001:200:1:ea::1 > Content-type: text/html > > Insecure $ENV{ENV} while running with -T switch at ./ipv6calcweb.cgi line 727. > make[1]: *** [test] Error 2 I can't reproduce this and also I do not understand that Perl claims about it, because I did already the ENV checking and assign only $1 from a regex to the Perl variable. Could you try to figure the reason out and if successful, pls. send me the patch. BTW: I'm using perl-5.10.0-38.fc9.i386 on Fedora 9 Thank you very much! Regards, Peter

1 0

Re: [ipv6calc] Re: ipv6calc 'make update' failure ?
by Peter Bieringer 19 Nov '08

19 Nov '08

JC Janos schrieb: > Hi, > > On Wed, Nov 19, 2008 at 1:43 PM, Peter Bieringer <pb(a)bieringer.de> wrote: >> Pls. try the new 0.72.0 version now, uploaded some minutes before. > > Close, I believe ... > > cd /usr/local/src/ipv6calc-0.72.0/ > > > ./configure \ > --prefix=/usr/local \ > --bindir /usr/local/bin \ > --mandir /usr/local/share/man \ > --enable-geoip > > make update > make > make test > > ... > IPv6/Teredo/RESERVED 0 > IPv6/Teredo/UNKNOWN 0 > > All tests were successfully done! > make[1]: Leaving directory `/usr/local/src/ipv6calc-0.72.0/ipv6logstats' > make[1]: Entering directory `/usr/local/src/ipv6calc-0.72.0/ipv6calcweb' > # Pseudo random selected > ./test_ipv6calcweb.sh 2001:200:1:ea::1 > Content-type: text/html > > ?? Use of uninitialized value $bin_ipv6calc in -f at ./ipv6calcweb.cgi line 659. > ?? Error: missing needed program > ?? make[1]: *** [test] Error 1 > make[1]: Leaving directory `/usr/local/src/ipv6calc-0.72.0/ipv6calcweb' > make[1]: Entering directory `/usr/local/src/ipv6calc-0.72.0/ipv6calc' > make > make[2]: Entering directory `/usr/local/src/ipv6calc-0.72.0/ipv6calc' > ... That's strange, could you please check: cd /usr/local/src/ipv6calc-0.72.0/ipv6calcweb ll ../ipv6calc/ipv6calc This should already exist > sudo make install > > ... > for f in *.8; do \ > install -m 644 $f /usr/local/share/man/man8; \ > done > make[1]: Leaving directory `/usr/local/src/ipv6calc-0.72.0/man' > make[1]: Entering directory `/usr/local/src/ipv6calc-0.72.0/lib' > make[1]: Nothing to be done for `install'. > make[1]: Leaving directory `/usr/local/src/ipv6calc-0.72.0/lib' > make[1]: Entering directory `/usr/local/src/ipv6calc-0.72.0/md5' > ?? make[1]: *** No rule to make target `install'. Stop. > make[1]: Leaving directory `/usr/local/src/ipv6calc-0.72.0/md5' Will be fixed. Peter

1 1

Re: ipv6calc 'make update' failure ?
by Peter Bieringer 19 Nov '08

19 Nov '08

JC Janos schrieb: > Hi, > > On Wed, Nov 19, 2008 at 12:56 PM, Peter Bieringer <pb(a)bieringer.de> wrote: >>> I am confused, how am I supposed to run 'make install' as root if it >>> invokes 'make test', obviously as root, and you advise to "avoid" >>> doing that? >> Hmm, "make installonly" does the job for you. > > Though ChangeLog says, > > 0.19: Peter Bieringer <pb(a)bieringer.de> > Extend "TODO" list > Print also info on "-?" > Fixes in spec file, see changelog at the end of that file > Add "COPYING" and "INSTALLING" > ----> Add "installonly" on "Makefile" to support changes in spec file > > There's no such target in the Makefile, > > make installonly > make: *** No rule to make target `installonly'. Stop. > > grep install Makefile > install: > ${MAKE} install; \ Just removed, no longer needed, will update the ChangeLog and create a next 0.72.0... Peter

1 0

Re: ipv6calc 'make update' failure ?
by Peter Bieringer 19 Nov '08

19 Nov '08

JC Janos schrieb: > On Wed, Nov 19, 2008 at 12:37 PM, Peter Bieringer <pb(a)bieringer.de> wrote: >> Yes, that's right... >> >> Could you try now the 0.72.0 release? >> >> ftp://ftp.bieringer.de/pub/linux/IPv6/ipv6calc/ >> >> If it works for you, then I will release it officially. > > Certainly, I'll try it in a moment ... > > I am confused, how am I supposed to run 'make install' as root if it > invokes 'make test', obviously as root, and you advise to "avoid" > doing that? Hmm, "make installonly" does the job for you. > Also, from a cvs a few moments ago, running 'make test' as user "test", > > whoami > test > > Completes, but shows one error, > > ... > make[1]: Leaving directory `/usr/local/src/ipv6calc/ipv6logstats' > make[1]: Entering directory `/usr/local/src/ipv6calc/ipv6calcweb' > # Pseudo random selected > ./test_ipv6calcweb.sh 2001:200:1:ea::1 > Content-type: text/html > > Use of uninitialized value $bin_ipv6calc in -f at ./ipv6calcweb.cgi line 659. > Error: missing needed program > make[1]: *** [test] Error 1 > make[1]: Leaving directory `/usr/local/src/ipv6calc/ipv6calcweb' > make[1]: Entering directory `/usr/local/src/ipv6calc/ipv6calc' > make > make[2]: Entering directory `/usr/local/src/ipv6calc/ipv6calc' > ... That's caused by the non-existend "ipv6calc" program which is required by test_ipv6calcweb.sh And ooops, this points me to a problem in the CGI at all: # Pseudo random selected ./test_ipv6calcweb.sh 2001:200:1:ea::1 Content-type: text/html Support for option '--db-ip2location-ipv4 <IP2Location IPv4 database file>' not compiled in, IP2Location support disabled Support for option '--db-ip2location-ipv6 <IP2Location IPv6 database file>' not compiled in, IP2Location support disabled Support for option '--db-geoip <GeoIP database file>' not compiled in, GeoIP support disabled <html> This should not happen... Peter

1 1

Re: ipv6calc 'make update' failure ?
by Peter Bieringer 19 Nov '08

19 Nov '08

JC Janos schrieb: > Hi, > > Thanks for working on this! > > On Wed, Nov 19, 2008 at 11:47 AM, Peter Bieringer <pb(a)bieringer.de> wrote: >> Please proceed further on. > > Fresh update ... > > ./configure OK > make update OK > make OK > make install > > a number of errors (output below) even though it looks like it installed, Errors are caused because you run "make test" as root...you should avoid that. > which ipv6calc > /usr/local/bin/ipv6calc > > ipv6calc > ipv6calc: version 0.71.0 > (P) & (C) 2001-2008 by Peter Bieringer <pb (at) bieringer.de> > This program formats and calculates IPv6 addresses > See 'ipv6calc -?|-h|--help' for more details > > --JC Ok, will release 0.72.0 now Peter

1 0

Re: ipv6calc 'make update' failure ?
by Peter Bieringer 19 Nov '08

19 Nov '08

JC Janos schrieb: > Hi, > > On Wed, Nov 19, 2008 at 10:59 AM, Peter Bieringer <pb(a)bieringer.de> wrote: >> Both changes now committed to CVS, so can you please check current CVS >> version? I would release 0.72.0 afterwards (I saw in my ChangeLog, that >> there are new features in CVS also...have forgotten...) > > I co'd latest CVS ... > > 1st step: 'make update' still fails at, > > ... > Location: http://standards.ieee.org/regauth/oui/oui.txt [following] > --2008-11-19 11:10:51-- http://standards.ieee.org/regauth/oui/oui.txt > Reusing existing connection to standards.ieee.org:80. > HTTP request sent, awaiting response... 200 OK > Length: 1919493 (1.8M) [text/plain] > Saving to: `oui.txt' > > 100%[======================================================================================>] > 1,919,493 430K/s in 4.8s > > 2008-11-19 11:10:59 (389 KB/s) - `oui.txt' saved [1919493/1919493] > > make create > make[2]: Entering directory `/usr/local/src/ipv6calc/databases/ieee-oui' > ./create_ieee_oui_headerfile.pl "oui_public.txt" > Create dbieee_oui.h automatically > Cannot open infile: oui_public.txt at ./create_ieee_oui_headerfile.pl line 22. > make[2]: *** [create] Error 2 > make[2]: Leaving directory `/usr/local/src/ipv6calc/databases/ieee-oui' > make[1]: *** [update] Error 2 > make[1]: Leaving directory `/usr/local/src/ipv6calc/databases/ieee-oui' Caused by renaming (and redirect) the file on the remote web server, fixed in CVS now (databases/ieee-oui/Makefile) > make[1]: Entering directory `/usr/local/src/ipv6calc/databases/ieee-iab' > echo "Download new version of file" > Download new version of file > ... > echo "Create database files for IPv4" > Create database files for IPv4 > cd ../ipv4-assignment && make update > make[2]: Entering directory `/usr/local/src/ipv6calc/databases/ipv4-assignment' > echo "Generate new header file, if necessary" > Generate new header file, if necessary > ./check-run-create.sh > Found newer than dbipv4addr_assignment.h files: IANA=0 ARIN=1 APNIC=1 > RIPENCC=1 LACNIC=1 AFRINIC=1 > Generate subnet powers > Proceed file: ../registries/iana/ipv4-address-space > Cannot open file: ../registries/iana/ipv4-address-space at > ./create-registry-list.pl line 126. > make[2]: *** [update] Error 2 > make[2]: Leaving directory `/usr/local/src/ipv6calc/databases/ipv4-assignment' > make[1]: *** [update] Error 2 > make[1]: Leaving directory `/usr/local/src/ipv6calc/databases/registries' Caused by strange redirect on IANA web server, fixed in CVS now (databases/registries/update-registries.sh). Please proceed further on. Regards, Peter

1 0

Re: ipv6calc 'make update' failure ?
by Peter Bieringer 19 Nov '08

19 Nov '08

JC Janos schrieb: > Hello, > > On Wed, Nov 19, 2008 at 9:59 AM, Peter Bieringer <pb(a)bieringer.de> wrote: >> It's a bug in the update script. Looks like at least me has never tested >> this on a fresh installation. >> >> Very simple patch is attached, will try to push 0.71.1 today or on Sunday. > > Thank you. > > Applying the patch does allow for 'make update' to complete without error. > > The next step of 'make', however, fails @: > > make > cd md5 && make > make[1]: Entering directory `/usr/local/src/ipv6calc/md5' > make[1]: Nothing to be done for `all'. > make[1]: Leaving directory `/usr/local/src/ipv6calc/md5' > cd databases/ieee-oui && make > make[1]: Entering directory `/usr/local/src/ipv6calc/databases/ieee-oui' > test -f dbieee_oui.h || make update > make[1]: Leaving directory `/usr/local/src/ipv6calc/databases/ieee-oui' > cd databases/ieee-iab && make > make[1]: Entering directory `/usr/local/src/ipv6calc/databases/ieee-iab' > test -f dbieee_iab.h || make update > make[1]: Leaving directory `/usr/local/src/ipv6calc/databases/ieee-iab' > cd databases/ipv4-assignment && make > make[1]: Entering directory `/usr/local/src/ipv6calc/databases/ipv4-assignment' > test -f dbipv4addr_assignment.h || make update > make[1]: Leaving directory `/usr/local/src/ipv6calc/databases/ipv4-assignment' > cd databases/ipv6-assignment && make > make[1]: Entering directory `/usr/local/src/ipv6calc/databases/ipv6-assignment' > test -f dbipv6addr_assignment.h || make update > make[1]: Leaving directory `/usr/local/src/ipv6calc/databases/ipv6-assignment' > cd lib && make GETOPT_INCLUDE= > ../databases/ieee-iab/dbieee_iab.h:2545: warning: (near initialization > for 'libieee_iab[2179]') > make[1]: *** [libieee.o] Error 1 > make[1]: Leaving directory `/usr/local/src/ipv6calc/lib' > make: *** [lib-make] Error 2 > > Another bug? Not really, unexpected IAB data (a " in a name destroys the C header file syntax) Fix for: databases/ieee-iab/create_ieee_iab_headerfile.pl @@ -127,6 +127,10 @@ # convert spaces to '-' $oui =~ s/\s+/-/ig; + # remove '"' + $oui =~ s/"//ig; + $t3 =~ s/"//ig; + # Some final cleanup $oui =~ s/-INT-L//ig; $oui =~ s/-B-V//ig; Both changes now committed to CVS, so can you please check current CVS version? I would release 0.72.0 afterwards (I saw in my ChangeLog, that there are new features in CVS also...have forgotten...) Peter

1 0

Re: ipv6calc 'make update' failure ?
by Peter Bieringer 19 Nov '08

19 Nov '08

Hi, JC Janos schrieb: > Hello, > > I'm attempting to build your ipv6calc utility on OpenSuse 11.0. > > cd /usr/local/src/ipv6calc > ./configure --enable-geoip > make update > > Here, I have a failure that I don't understand, > > ... > echo "Create database files for IPv4" > Create database files for IPv4 > cd ../ipv4-assignment && make update > make[2]: Entering directory `/usr/local/src/ipv6calc/databases/ipv4-assignment' > echo "Generate new header file, if necessary" > Generate new header file, if necessary > ./check-run-create.sh > Found newer than dbipv4addr_assignment.h files: IANA=0 ARIN=1 APNIC=1 > RIPENCC=1 LACNIC=1 AFRINIC=1 > Generate subnet powers > Proceed file: ../registries/iana/ipv4-address-space > Cannot open file: ../registries/iana/ipv4-address-space at > ./create-registry-list.pl line 126. > make[2]: *** [update] Error 2 > make[2]: Leaving directory `/usr/local/src/ipv6calc/databases/ipv4-assignment' > make[1]: *** [update] Error 2 > make[1]: Leaving directory `/usr/local/src/ipv6calc/databases/registries' > > This seems to be a bug. Or, perhaps, a problem with my procedure? It's a bug in the update script. Looks like at least me has never tested this on a fresh installation. Very simple patch is attached, will try to push 0.71.1 today or on Sunday. Thank you for notification. Regards, Peter --- databases/registries/update-registries.sh.old 2008-11-19 18:53:39.000000000 +0100 +++ databases/registries/update-registries.sh 2008-11-19 18:54:25.000000000 +0100 @@ -3,7 +3,7 @@ # Project : ipv6calc/databases/registries # File : update-registries.sh # Version : $Id: update-registries.sh,v 1.4 2007/03/03 11:57:29 peter Exp $ -# Copyright : 2002-2007 by Peter Bieringer <pb (at) bieringer.de> +# Copyright : 2002-2008 by Peter Bieringer <pb (at) bieringer.de> # replaces ../ipv4-assignment/update-ipv4-assignment.sh # replaces ../ipv6-assignment/update-ipv6-assignment.sh # @@ -33,6 +33,7 @@ get_urls | while read subdir url filename format; do echo "Check: $subdir" + [ ! -d "$subdir" ] && mkdir "$subdir" pushd $subdir || exit 1 wget $url$filename --timestamping --retr-symlinks retval=$?

1 0